Your Online Source for Heat Transfer and Sign Supplies

View Cart/Checkout
# of Items: | Subtotal: $0.00

800.241.0262

12 inch x 10 inch sheet of Glitter HTV - HALF SHEET


Black Glitter
Blue Glitter
Brown Glitter
Burgundy Glitter
Copper Glitter
Dark Gold Glitter
Dark Green Glitter
Dark Purple Glitter
Dark Violet Glitter
Deep Gold Glitter
Deep Pink
Gold Glitter
Green Glitter
Grey Glitter
Holo Black Glitter
Holo Blue Glitter
Holo Gold Glitter
Holo Green Glitter
Holo Lavender Glitter
Holo Pink Glitter
Holo Red Glitter
Holo Silver Glitter
Khaki Glitter
Lavender Glitter
Leaf Glitter
Light Green Glitter
Multi Glitter
Navy Glitter
Neon Blue
Neon Green
Neon Orange Glitter
Neon Peach Glitter
Neon Pink Glitter
Neon Yellow Glitter
Ocean Blue Glitter
Pink Glitter
Plum Glitter
Purple Glitter
Rainbow Black Glitter
Rainbow Blue Glitter
Rainbow Green Glitter
Rainbow Pink Glitter
Rainbow Red Glitter
Rainbow White Glitter
Rainbow Yellow Glitter
Red Glitter
Rose Gold Glitter
Royal Blue Glitter
Silver Glitter
Sky Blue Glitter
Snow White
Turq Glitter
     
White Glitter
     

Make Your Designs Sparkle.

Add the sparkle of glitter effects to any logo with JSI Glitter heat transfer film. Perfect for dance and cheer wear or anywhere you need some extra shine. Glass like fragments make this the ultimate in glitter transfer films. JSIsigns buys our glitter direct from Korean manufactures and pass the saving on to our customers. All glitter in the USA comes from 3 or 4 manufactures in Korea and is imported into the USA.


Cutting glitter tips:

  • Glitter can be inconsistant from batch to batch and color to color. Therefore, always do test cuts for best weeding results.
  • You should always see a light scrtach in your liner after you weed out your test cut. We often recommend double cutting if you cutter is accurate enough to go back to the exact same spot. This helps see the weed lines when weeding your pattern.
  • Glitter HTV is very different than standard HTV like PerfecPress and Easyweed. Since glitter has a rough surface, completly different adhesives are used to adhere the glitter to the liner. Some glitters weed easier than others based on the amount of glue used to adhere the glitter to the liner. Also some glitters require adding a white base to the holtmelt adhesive to make the glitter opaque enough for dark garments. Some colors of glitter require different amount of glitter flakes to make enough coverage for the color to "pop". Glitter flake do not always stand straight up in uniform direction, we call this the grain of the flakes. You can experience different cutting cutting into the grain or with the grain. All of these are great reason to do test cuts most importanly with glitter htv
  • Also, if your plotter allows you to change the thickness of the blade, using a 60 degree blade will make the job much easier. As always, you should do a test before sending your whole job, and adjust your pressure/speed from there. If you are unfamiliar on performing a test cut, there is a guide here.
Heat Application:
  • Pre-heat 2/3 seconds
  • Time: 10-15 Seconds
  • Temperature: 325 F / 160 C
  • Pressure: Firm
  • Peel: warm
Adheres To:
  • 100% cotton
  • 100% uncoated polyester
  • poly/cotton blends
Specifications:
  • PVC composition
  • Pressure sensitive backing
  • Glitter rough finish
  • 325 Microns/12.8 Mils
  • 45/60 blade
  • Can be used as top layer (Not recommended to be layered on top of itself)
Washing Instructions:
  • Do not dry clean
  • Machine wash WARM / mild detergent
  • Dry at normal setting
  • No chlorine bleach
  • Wait 24 hours before first wash